Product Description

High Collar Height Fin Die

Product Info

Minorder 1

Product Detail

Following are regular High Collar Height Fin Die Sizes for reference.


 Φ15.88×12R×1P


(1)This kind of die is suitable for the forced-air cooling refrigerator.

(2)This kind dies normally can make several similar parts in one die.

(3)Using Swedish or Japanese steel,punch and die use ASP30 or HAP40.

(4)Fin die manipulation is very convenient,excellent interchangeability of components.

(5)Adopting Misumi standard components(including guide post,bushing,spring,screw etc)which made in  Japan.

(6)Stroke time reach to 200-250 times per minute.


Φ12.7×12R×1P


(1) This kind of die  is suitable for the refrigeration, the freezing or some special professions.

(2) Collar height is decided by the numerous factors, like aluminum foil,lubricantion oil,distance between holes and rows and so on.

(3) RETA high collar height fin die has large adjustment of collar height, generally may control above 6mm..

(4) RETA high collar height fin die keeps the normal pierce coefficient,it will avoid the crazed collar problem.

(5) Normally 3/8 die can reach to 8mm height,1/2 die can reach to 10mm height and 5/8 die can reach to 12mm height.

(6) Using Swedish or Japanese steel,punch and die use ASP30 or HAP40.

(7)Fin die manipulation is very convenient,excellent interchangeability of components.

(8)Adopting Misumi standard components(including guide post,bushing,spring,screw etc)which made in Japan.

(9)Stroke time reach to 150-220 times per minute.


Φ9.52×12R×2P


(1) This kind of die  is suitable for the refrigeration, the freezing or some special professions.

(2) Collar height is decided by the numerous factors, like aluminum foil,lubricantion oil,distance between holes and rows and so on.

(3)RETA high collar height fin die has large adjustment of collar height, generally may control above 6mm..

(4) RETA high collar height fin die keeps the normal pierce coefficient,it will avoid the crazed collar problem.

(5)  Normally 3/8 die can reach to 8mm height,1/2 die can reach to 10mm height and 5/8 die can reach to 12mm height.

(6) Using Swedish or Japanese steel,punch and die use ASP30 or HAP40.

(7)Fin die manipulation is very convenient,excellent interchangeability of components.

(8)Adopting Misumi standard components(including guide post,bushing,spring,screw etc)which made in Japan.

(9)Stroke time reach to 150-220 times per minute.












Φ9.52×12R×1P



(1) This kind of die  is suitable for the refrigeration, the freezing or some special professions.

(2) Collar height is decided by the numerous factors, like aluminum foil,lubricantion oil,distance between holes and rows and so on.

(3) RETA high collar height fin die has large adjustment of collar height, generally may control above 6mm..

(4) RETA high collar height fin die keeps the normal pierce coefficient,it will avoid the crazed collar problem.

(5)  Normally 3/8 die can reach to 8mm height,1/2 die can reach to 10mm height and 5/8 die can reach to 12mm height.

(6) Using Swedish or Japanese steel,punch and die use ASP30 or HAP40.

(7)Fin die manipulation is very convenient,excellent interchangeability of components.

(8)Adopting Misumi standard components(including guide post,bushing,spring,screw etc)which made in Japan.

(9)Stroke time reach to 150-220 times per minute.












Φ7×36R×1P


(1) This kind of die  is suitable for the refrigeration, the freezing or some special professions.

(2) Collar height is decided by the numerous factors, like aluminum foil,lubricantion oil,distance between holes and rows and so on.

(3) RETA high collar height fin die has large adjustment of collar height, generally may control above 6mm..

(4) RETA high collar height fin die keeps the normal pierce coefficient,it will avoid the crazed collar problem.

(5)  Normally 3/8 die can reach to 8mm height,1/2 die can reach to 10mm height and 5/8 die can reach to 12mm height.

(6) Using Swedish or Japanese steel,punch and die use ASP30 or HAP40.

(7)Fin die manipulation is very convenient,excellent interchangeability of components.

(8)Adopting Misumi standard components(including guide post,bushing,spring,screw etc)which made in Japan.

(9)Stroke time reach to 150-220 times per minute.



Products Categorys

Recommend Products

Navigation