Familiar with the working principle of the bending machine




It is very important to be familiar with the working principle of the bending machine and to understand how the various parts work together, so that we can better grasp the various parts of the bending machine and complete the work better. Let's learn about it below.
1. Synchronization system: The machine consists of a mechanical synchronization mechanism composed of torsion shaft, swing arm, joint bearing, etc., with simple structure, stable and reliable performance, and high synchronization accuracy. The mechanical stop is adjusted by the motor, and the numerical control system controls the value.​​
2. Slider part: hydraulic transmission is adopted, and the slider part is composed of a slider, an oil cylinder and a mechanical stopper fine-tuning structure. The left and right oil cylinders of the bending machine are fixed on the frame, and the piston (rod) drives the slider to move up and down through hydraulic pressure, and the mechanical stop is controlled by the numerical control system to adjust the value.​​
3. Material stopper mechanism: The material stopper of the bending machine is driven by a motor, and the two screw rods are driven to move synchronously by the chain operation, and the numerical control system controls the material stopper size.​​
4. Worktable part: It is controlled by the button box, so that the motor of the bending machine drives the material stopper to move forward and backward, and the distance of movement is controlled by the numerical control system. The minimum reading is 0.01 mm (there are limit switches at the front and rear positions).
Navigation